Surface lift Diavolezzagletscher-Sass Queder 1 in Bernina
2-person Surface lift Diavolezzagletscher-Sass Queder 1
AI Abstract
The Diavolezzagletscher-Sass Queder 1 cable car, a 2-person Surface lift model located in Bernina (Grisons), was built in 1959 and connected the valley station at 2811 m with the mountain station at 2961 m above sea level. The length was 700 meters, and the elevation difference was 150 meters. The system was designed by the manufacturer Brändle and was decommissioned in 1990 and replaced by a successor.
| Country |
|
|---|---|
| Canton / State |
|
| Location | Bernina (Diavolezza) |
| Name | Diavolezzagletscher-Sass Queder 1 |
| Type | 2-SLE (SUMF-E2) |
| Operating Time | 1959 - 1990 |
| Manufacturer |
Brändle (1965 Garaventa) |
| Status |
 |
- Country: Switzerland
- Canton / State: Grisons
- Location: Bernina (Diavolezza)
- Name: Diavolezzagletscher-Sass Queder 1
- Type: 2-SLE
- Operating Time: 1959-1990
- Year of construction: 1959
- Manufacturer: Brändle
- Status: Dismantled with replacement
- Bottom station altitude: 2811 m
- Difference in altitude: 150 m
- Length: 700 m
- Capacity: 700 P/h
- Transportation uphill: Yes
- Transportation downhill: No
- Remarks: 1965 saniert durch Garaventa
Frequently asked questions
What is the ropeway Diavolezzagletscher-Sass Queder 1?
The Diavolezzagletscher-Sass Queder 1 ropeway is a 2-person Surface lift in Bernina and connects the valley station at 2811 m to the mountain station at 2961 m.
What is the hourly passenger capacity of the Diavolezzagletscher-Sass Queder 1 ropeway?
The maximum capacity of the Diavolezzagletscher-Sass Queder 1 ropeway is 700 people per hour.
When was the Diavolezzagletscher-Sass Queder 1 ropeway constructed?
The Diavolezzagletscher-Sass Queder 1 ropeway was constructed in 1959.
Where is the Diavolezzagletscher-Sass Queder 1 ropeway located?
The Diavolezzagletscher-Sass Queder 1 ropeway is operating in Bernina (Switzerland).
How long is the Diavolezzagletscher-Sass Queder 1 ropeway?
The diagonal length of the Diavolezzagletscher-Sass Queder 1 ropeway is 700 meters.
What is the elevation gain of the Diavolezzagletscher-Sass Queder 1 ropeway?
The Diavolezzagletscher-Sass Queder 1 ropeway covers an elevation gain of 150 meters.
Who is the manufacturer of the Diavolezzagletscher-Sass Queder 1 ropeway?
The Diavolezzagletscher-Sass Queder 1 ropeway was constructed by the company Brändle.
Technical data
| Bottom station altitude | 2811 | m |
|---|---|---|
| Top station altitude | 2961 | m |
| Difference in altitude | 150 | m |
| Length | 700 | m |
| Capacity | 700 | P/h |
| Travel time | ||
| Speed | ||
| Number of towers | ||
| Number of carriers | ||
| Drive terminal | ||
| Tensioning terminal | ||
| Carrier manufacturer | ||
| Rope manufacturer | ||
| Electronics manufacturer | ||
| Transportation uphill | Yes | |
| Transportation downhill | No | |
| Remarks | 1965 saniert durch Garaventa | |
Chronicle
-
-
-
Photos of this ropeway
Videos of this ropeway
Location of the installation
Coordinates (decimal): Bottom station 46.41505 N / 9.96674 E, Top station 46.41037 N / 9.97098 E
Location of the installation: Google Maps • Swisstopo • Swisstopo (historisch)
Map legend: 
Ropeway in operation 
Ropeway out of operation 
Ropeway dismantled
Other ropeways in Bernina
2-person Surface lift Diavolezzafirn-Sass Queder
2-person Surface lift Bernina-Piz Lagalb- 2-person Surface lift Diavolezzagletscher-Sass Queder
2-person Surface lift Bernina-Diavolezza- 2-person Surface lift Li Cüni
- 2-person Surface lift Ospizio Bernina
2-person Surface lift Bügliet- 2-person Surface lift Diavolezzagletscher-Sass Queder 2
2-person Surface lift Vallin-Pas-Chüra- 2-person Surface lift Curtinatsch
- 2-person Surface lift Bernina
- 2-person Surface lift Bernina-Piz Lagalb
- 2-person Surface lift Bernina-Diavolezza
- 2-person Surface lift Ospizio Bernina
