Surface lift Halten-Springenboden in Diemtigen
2-person Surface lift Halten-Springenboden
AI Abstract
The Halten-Springenboden cable car, a 2-person Surface lift model located in Diemtigen (Bern), was built in 1969 and connected the valley station at 1207 m with the mountain station at 1400 m above sea level. The length was 1000 meters, and the elevation difference was 193 meters. The system was designed by the manufacturer Küpfer and was decommissioned in 2004 and replaced by a successor.
| Country |
|
|---|---|
| Canton / State |
|
| Location | Diemtigen (Springenboden) |
| Name | Halten-Springenboden |
| Type | 2-SLE (SUMF-E2) |
| Operating Time | 1969 - 2004 |
| Manufacturer | Küpfer |
| Status |
 |
- Country: Switzerland
- Canton / State: Bern
- Location: Diemtigen (Springenboden)
- Name: Halten-Springenboden
- Type: 2-SLE
- Operating Time: 1969-2004
- Year of construction: 1969
- Manufacturer: Küpfer
- Status: Dismantled with replacement
- Bottom station altitude: 1207 m
- Difference in altitude: 193 m
- Length: 1000 m
- Capacity: 720 P/h
- Transportation uphill: Yes
- Transportation downhill: No
Frequently asked questions
What is the ropeway Halten-Springenboden?
The Halten-Springenboden ropeway is a 2-person Surface lift in Diemtigen and connects the valley station at 1207 m to the mountain station at 1400 m.
What is the hourly passenger capacity of the Halten-Springenboden ropeway?
The maximum capacity of the Halten-Springenboden ropeway is 720 people per hour.
When was the Halten-Springenboden ropeway constructed?
The Halten-Springenboden ropeway was constructed in 1969.
Where is the Halten-Springenboden ropeway located?
The Halten-Springenboden ropeway is operating in Diemtigen (Switzerland).
How long is the Halten-Springenboden ropeway?
The diagonal length of the Halten-Springenboden ropeway is 1000 meters.
What is the elevation gain of the Halten-Springenboden ropeway?
The Halten-Springenboden ropeway covers an elevation gain of 193 meters.
Who is the manufacturer of the Halten-Springenboden ropeway?
The Halten-Springenboden ropeway was constructed by the company Küpfer.
Technical data
| Bottom station altitude | 1207 | m |
|---|---|---|
| Top station altitude | 1400 | m |
| Difference in altitude | 193 | m |
| Length | 1000 | m |
| Capacity | 720 | P/h |
| Travel time | ||
| Speed | ||
| Number of towers | ||
| Number of carriers | ||
| Drive terminal | ||
| Tensioning terminal | ||
| Carrier manufacturer | ||
| Rope manufacturer | ||
| Electronics manufacturer | ||
| Transportation uphill | Yes | |
| Transportation downhill | No | |
| Remarks | None | |
Chronicle
-
-
-
Photos of this ropeway
Videos of this ropeway
Location of the installation
Coordinates (decimal): Bottom station 46.61874 N / 7.56984 E, Top station 46.61665 N / 7.57744 E
Location of the installation: Google Maps • Swisstopo • Swisstopo (historisch)
Map legend: 
Ropeway in operation 
Ropeway out of operation 
Ropeway dismantled
Other ropeways in Diemtigen
2-person Surface lift Riedli-Nüegg
2-person Surface lift Stierengrimmi- 2-person Surface lift Halten-Springenboden
2-person Surface lift Nidegg- 2-person Surface lift Heiteren
2-person Surface lift Homad
2-person Surface lift Röschteschwend
2-person Surface lift Schwarzenberg
2-person Surface lift Riedli-Nüegg
2-person Surface lift Tubelfärich 1
2-person Surface lift Tubelfärich 2- 2-person Surface lift Widbodmen
2-person Surface lift Springenboden
2-person Surface lift Egg- 2-person Surface lift Stierengrimmi
